Categories
Contact Us

Shaoxing Huida Metal Factory

Add:No.68,Beimen Haitang Road, Lihai Town, Shangyu Dist., Shaoxing, Zhejiang, China

Tel:+86-575-82781973

Fax:+86-575-82781351


Mr. Peng Du

Sales Director

Mobile:+86 13625813443

Email:1023180779@qq.com

13735325636@139.com


Tracy

Sales manager

Mobile:+86 13625813443
Email:sxhdtjl@foxmail.com


Web:https://syhdzm.en.alibaba.com/
http://syhdzm.1688.com/

Service Hotline
+86-575-82781973

News

Home > NewsContent

Metal Stamping Material To Select The Attention To What The Problem?

Shaoxing Huida Metal Factory | Updated: Aug 02, 2017

Metal Stamping material to select the attention to what the problem?
Metal Stamping material to select the attention to what the problem? Metal Stamping is the use of punch and die will be stainless steel, iron, aluminum, copper and other sheet and other materials to deformation or fracture, to achieve a certain shape and size of a process. If the material is not selected, it is easy to defective products, resulting in high costs and so on, the next Branch to create a Metal Stamping material to select the attention to what the problem?
Metal Stamping material selection should pay attention to the problem:
1, in the steel plate specifications, whether it is a fixed plate or coil, the same material, material thickness of the material, different width of different sales price. Therefore, in order to reduce costs, it is necessary to develop from the development of the width of the roll, in ensuring the utilization of materials under the premise of the maximum price range is not selected. Such as the size of the board as much as possible to choose the appropriate size, from the steel cut after the completion of cutting, do not have to cut twice, reduce the cost of cutting; for the coil, try to choose open-roll forming roll specifications and technology, Cut the workload, improve work efficiency.
2, the thickness of the plate there is a deviation requirements, usually within the allowable range of deviation, should first use the next deviation of the plate.
3, to determine the shape and size of Metal Stamping plate material, is to analyze the degree of Metal Stamping deformation, design process and the preparation of technical procedures of the premise. If the shape of the sheet is appropriate, not only the deformation along the distribution of uneven material can be significantly improved, and the forming limit can also be improved, and can reduce the height of the ear, reducing the trimming margin. In addition, for some of the blank after the direct shape of the parts, if given the exact shape and size of the sheet, you can reduce the number of mold clamping mode, thereby shortening the production cycle and improve productivity.
4, in the product design selection, to avoid the use of high grade material caused by product performance overcapacity, at the same time, to meet the requirements of products, process requirements, try to choose the existing production models used by the material, material thickness, the formation of material platform, For the follow-up procurement, inventory management to facilitate. Such as ordinary cold-rolled plate of the key performance requirements is its pull, so in line with the requirements of product quality as far as possible to choose low-grade materials. And for the choice of material thickness, in addition to considering the body after the formation of the strength, weight, but also pay attention to the thickness of the popular. Because the special material thickness, the supplier is difficult to supply, and the price is high.
In the steel plate specifications, whether it is a fixed plate or coil, the same material, material thickness of the material, different width of different sales price. Therefore, in order to reduce costs, it is necessary to develop from the development of the width of the roll, in ensuring the utilization of materials under the premise of the maximum price range is not selected. Such as the size of the board as much as possible to choose the appropriate size, from the steel cut after the completion of cutting, do not have to cut twice, reduce the cost of cutting; for the coil, try to choose open-roll forming roll specifications and technology, Cut the workload, improve work efficiency.
Determining the shape and size of the Metal Stamping spread sheet is the prerequisite for analyzing the degree of Metal Stamping deformation, the design process and the formulation of the technical procedures. If the shape of the sheet is appropriate, not only the deformation along the distribution of uneven material can be significantly improved, and the forming limit can also be improved, and can reduce the height of the ear, reducing the trimming margin. In addition, for some of the blank after the direct shape of the parts, if given the exact shape and size of the sheet, you can reduce the number of mold clamping mode, thereby shortening the production cycle and improve productivity.