Contact Us

Shaoxing Huida Metal Factory

Add:No.68,Beimen Haitang Road, Lihai Town, Shangyu Dist., Shaoxing, Zhejiang, China



Mr. Peng Du

Sales Director

Mobile:+86 13625813443


Sales manager

Mobile:+86 13625813443


Service Hotline


Home > NewsContent

Design Of Daily Operation Of CNC Rotary Press

Shaoxing Huida Metal Factory | Updated: Jun 05, 2017

CNC spinning machine of the daily operation of the operating instructions, CNC rotary press machining using metal ductility, combined with forging, extrusion, stretching, bending, rolling, rolling and rolling and other process characteristics, to achieve a no cutting Process characteristics, CNC spinning machine with high quality and efficient metal products spinning molding process. Strong spinning is the rapid development of the fifties after this century. This molding technology has the advantages of good deformation condition, good product performance, small dimensional tolerance, high material utilization rate, wide range of products, and can process the whole seamless hollow rotary parts.

  CNC Metal Spinning IMPORTANT: You should be familiar with the position of the emergency stop button switch so that you can press it when you need it, and you must power off the machine before placing the fuse. Have enough work space to avoid danger. Water or oil can cause the ground to slip and cause danger. In order to prevent accidents, the working ground should be kept clean and dry.

  Bo Rui CNC spinning machine

  DANGER: Control devices, transformers, motors, junction boxes, high voltage terminals and other live parts Do not touch with hand (or no insulation), otherwise it will cause electric shock. Do not touch the switch with wet hands, otherwise it will cause electric shock.

  Before using the switch, be sure to make sure not to make mistakes, do not touch the switch. If a task is to be done by more than two people, then at every step of the operation we know that the CNC spinning machine is equipped with a lot of safety devices to prevent damage and damage to the operator and equipment.

  CNC spinning the working principle:

  Spinning machine is used to carry out the metal spinning process, manufacturing thin-walled hollow rotary parts of the plastic processing equipment. The wide range of processing a wide range of small diameter only a few millimeters, the largest nearly 10m.

  Spinning machine generally by the fuselage, spindle box, wheel seat and tailstock and other major components. During the spinning process, the blank (plate or ring) is clamped on the mold for rotational movement, and the rotary press is pressurized to continuously deform the blank by point to become the workpiece.

  1, scroll compressor works

  The scroll air compressor is formed by the dynamic and static vortex of the functional equation line. In the process of suction, compression and exhaust, the fixed scroll is fixed on the frame. The movable plate is driven by the eccentric shaft and is restrained by the anti-rotation mechanism. It rotates around the center of the center of the static disk, The gas is sucked into the periphery of the static disk through the air filter. As the eccentric shaft rotates, the gas is gradually compressed in the crescent-shaped compression chamber composed of the static and dynamic disk teeth and then discharged continuously from the axial hole of the static disk.

  2, centrifugal compressor working principle

  Centrifugal Compressors The main working parts for compressed gas are high-speed rotating impellers and diffuser areas where the flow area is increasing. In short, the working principle of the centrifugal compressor is through the impeller on the gas work, in the impeller and diffuser flow channel, the use of centrifugal boost and slow expansion of the role of mechanical energy can be converted into gas pressure energy The

  CNC Metal Spinning More generally speaking, the gas flow through the centrifugal compressor impeller, the high-speed rotation of the impeller to make the gas under the action of centrifugal force, on the one hand the pressure has increased, on the other hand the speed is greatly increased, that is, centrifugal compressor Through the impeller first of the prime mover mechanical energy into gas static pressure and kinetic energy. Since then, the gas flow through the diffuser channel, the flow channel cross-section gradually increased in front of the gas molecular flow rate decreased, followed by gas molecules continue to surge forward, so that most of the kinetic energy of the gas and into static pressure, That is, to further play the role of pressurization.


Add: No.68,Beimen Haitang Road, Lihai Town, Shangyu Dist., Shaoxing, Zhejiang, China 

Tel: +86-0575-82781973

Fax: +86-0575-82781351

Mr. Peng Du

Sales Director

Mobile:+86 13735325636 



Sales manager

Mobile: +86 13625813443