Categories
Contact Us

Shaoxing Huida Metal Factory

Add:No.68,Beimen Haitang Road, Lihai Town, Shangyu Dist., Shaoxing, Zhejiang, China

Tel:+86-575-82781973

Fax:+86-575-82781351


Mr. Peng Du

Sales Director

Mobile:+86 13625813443

Email:1023180779@qq.com

13735325636@139.com


Tracy

Sales manager

Mobile:+86 13625813443
Email:sxhdtjl@foxmail.com


Web:https://syhdzm.en.alibaba.com/
http://syhdzm.1688.com/

Service Hotline
+86-575-82781973

News

Home > NewsContent

CNC Metal Spinning Replace The Artificial Spinning

Shaoxing Huida Metal Factory | Updated: Jun 08, 2017

CNC Metal Spinning Replace the artificial spinning
1, CNC rotary tail shaft can not be extended:
If the CNC rotation of the tail shaft into and out of the cylinder has the action, and the tail shaft can not advance and retreat, it may be the tail shaft cylinder, can increase the lubrication of the tail shaft and oil to solve. In addition, it may be the cylinder and the tail shaft connected to the nut loose, re-lock the nut and the tail shaft is not parallel, can release the nut, the tail shaft and cylinder are back to the back to re-alignment and then lock.
 
2, CNC Metal Spinning the tail shaft has stretched out, but out of place:
The tail shaft is extended, but not out of place or locked in place not alarm, you can press the reset button to try again, can not solve the time to find the tail box to adjust the tail shaft forward sensor position, such as can not be resolved, Determine whether the tail shaft is advanced in the sensor. Out of the diagnostic screen, check the computer in the tail axis in place sensor power and loss of power changes in the state is normal, hand movement sensor, light and light and the computer changes are consistent.
    
3, the lock is not in place The alarm solution is the same as above.
4, the tail axis cylinder does not move:
 May be damaged solenoid valve can manually press the solenoid valve manual button for manual operation, while holding down the clamping, advance and retreat solenoid valve, tail shaft forward. Only hold the mold clamping solenoid valve, tail shaft back. Manual normal can determine whether the damage to the solenoid valve, but also refer to the status of the other solenoid valve to determine the state.
 CNC numerical control spinning and manual manual CNC spinning difference:
1, manual manual CNC spinning by the rotary press control knife, CNC automatic CNC spinning bed by the CNC system control spinning knife road.
2, CNC Metal Spinning artificial make the product consistency is poor, CNC machine tools to make the product consistency is good.
3, artificial CNC spinning need to master a certain degree of spinning skills, CNC numerical control spinning for spinning without technical personnel operation.
4, CNC numerical control spinning can be more than one machine operation, artificial only one machine operation mode.
5, due to manual spinning spinning output is very large, generally only 8 hours a day, CNC machine tools can work 24 hours a day.
6, orders a lot of hours, spinning workers are not good recruitment, and CNC spinning do not need to recruit spinning workers, ordinary workers can.
7, spinning workers wages than ordinary operators more than twice the wages, CNC spinning can reduce product costs.
In particular, people now 90 after the society, generally do not want to bear like spinning workers need this technology and work requires a lot of effort, so CNC spinning will be spinning the future direction of development of the industry. That can reduce costs, product quality can also be improved.

SHAOXING HUIDA METAL FACTORY 

Add: No.68,Beimen Haitang Road, Lihai Town, Shangyu Dist., Shaoxing, Zhejiang, China 

Tel: +86-0575-82781973

Fax: +86-0575-82781351

Mr. Peng Du

Sales Director

Mobile:+86 13735325636 

Email: 1023180779@qq.com

        13735325636@139.com


Tracy

Sales manager

Mobile: +86 13625813443
Email:sxhdtjl@foxmail.com
SKYPE:tracy4301