Categories
Contact Us

Shaoxing Huida Metal Factory

Add:No.68,Beimen Haitang Road, Lihai Town, Shangyu Dist., Shaoxing, Zhejiang, China

Tel:+86-575-82781973

Fax:+86-575-82781351


Mr. Peng Du

Sales Director

Mobile:+86 13625813443

Email:1023180779@qq.com

13735325636@139.com


Tracy

Sales manager

Mobile:+86 13625813443
Email:sxhdtjl@foxmail.com


Web:https://syhdzm.en.alibaba.com/
http://syhdzm.1688.com/

Service Hotline
+86-575-82781973

News

Home > NewsContent

Advantages Of CNC Metal Spinning Process

Shaoxing Huida Metal Factory | Updated: Sep 05, 2017

Advantages of CNC Metal Spinning Process
1. Metal deformation conditions are good, CNC Metal Spinning when the wheel and the metal contact with the point of contact, so the contact area is small, the unit pressure is high, up to 2500 ~ 3500MPa or more, so CNC Metal Spinning is suitable for processing high-strength difficult to deformation of the material The Moreover, the total required deformation force is small, so that the rate of exploitation is greatly reduced. Processing the same size of the parts, CNC Metal Spinning machine tonnage tonnage is only about 1/20 of the tonnage.
2. Wide range of products, according to the ability of CNC Metal Spinning machine can produce large diameter thin-walled pipe, special pipe, variable cross-section pipe and spherical, hemispherical, oval, curved rod and with a ladder and changing wall thickness of almost Submersible seals and torpedo shells, radar mirrors and searchlight enclosures; jet engine fairings and prime mover parts; hydraulic, compressor housings and rounds Tubing, turbine shaft, nozzle, TV cone, combustor cone and bellows; dryer, mixer and washing machine drum; shallow disc shape, disc shape, hemispherical head; milk tank and hollow core thin wall Daily necessities and so on.
3. Material utilization is high, the production cost is low. CNC Metal Spinning and processing compared with the machine can save 20% to 50% of materials, up to 80%, so that the cost reduction of 30% to 70%.
4. The performance of the product is improved remarkably. After the NC spinning, the material structure and mechanical properties of the material are changed, the grain size is small and the fibrous characteristics are formed. Tensile strength, yield strength and hardness are improved, the strength can be increased by 60% -90%, while the elongation is reduced.
5. Product surface roughness is low, the size of the tolerance is small. CNC Metal Spinning products, the surface roughness of the general up to 3.2 ~ 1.6um, the best can reach 0.4 ~ 0.2um, after several CNC Metal Spinning up to 0.1um. CNC Metal Spinning products can achieve a smaller wall thickness tolerance , Such as φ300MM, tolerance of 0.05mm, φ1600mm, the tolerance of 0.12.
6. An important feature of metal CNC Metal Spinning is to produce a seamless, hollow body, which eliminates weld-related discontinuities, reduced strength, embrittlement and tensile stress.
7. Metal CNC Metal Spinning and sheet metal stamping compared to the metal CNC Metal Spinning can greatly simplify the equipment used in the process, some need 6 to 7 stamping parts, CNC Metal Spinning can be manufactured once, and the metal CNC Metal Spinning Machine tools with the same capacity than the stamping machine cheaper than half the price.
8. Metal pressure method can produce ultra-wide plate, the base method is to spin-spinning cylindrical parts along the bus direction cut flat. In foreign countries can CNC rotary φ2m cylindrical CNC Metal Spinning machine is not a large equipment, the use of such equipment easy to manufacture 6m wide sheet, but with the traditional rolling method to produce 3m wide sheet needs a considerable The United States with CNC Metal Spinning technology to create a wide 7.5m, 9m long extra-wide plate.
9. In the process of CNC Metal Spinning, due to the CNC spin-rolled material is point-by-point deformation, so any slag, sandwich, crack, trachoma and other defects can easily be exposed. In this way, the CNC Metal Spinning process is also attached to the role of the product inspection.
10. Wide source of blanks, can be used hollow stamping parts, extrusion parts, castings, welding parts, machined forgings and rolling parts and circular plate for the blank, and can be CNC Metal Spinning titanium, molybdenum, tungsten, tantalum, niobium A class of refractory metals and other alloys.
 CNC Metal Spinning process is very wide range of applications, which must and its advantages are inseparable, then this CNC Metal Spinning process which highlights the advantages of here, we must by the Hengsheng CNC spin to give you a simple tell The.
1, metal deformation conditions are good, CNC Metal Spinning when the rotor and the metal contact with the point of contact, so the contact area is small, the unit pressure is high, suitable for processing high-strength difficult to deformation of the material.
2, a wide range of products, according to the ability of CNC Metal Spinning machine can produce large diameter thin-walled pipe, special pipe, variable cross-section pipe and spherical, hemispherical, etc., so a wide range of applications.
3, the material utilization rate is high, the production cost is low.
4, the product surface roughness is low, small size tolerance.
5, can be made as a whole seamless rotary body hollow pieces, the fundamental elimination of the weld-related discontinuities, reduced strength, embrittlement and tensile stress concentration and other ills.
Of course, these are just part of the advantages of CNC Metal Spinning process, there are more advantages Xiaobian here do not give you one by one list, in short, CNC Metal Spinning process is a wide range of applications, and the effect of good technology.