Categories
Contact Us

Shaoxing Huida Metal Factory

Add:No.68,Beimen Haitang Road, Lihai Town, Shangyu Dist., Shaoxing, Zhejiang, China

Tel:+86-575-82781973

Fax:+86-575-82781351


Mr. Peng Du

Sales Director

Mobile:+86 13625813443

Email:1023180779@qq.com

13735325636@139.com


Tracy

Sales manager

Mobile:+86 13625813443
Email:sxhdtjl@foxmail.com


Web:https://syhdzm.en.alibaba.com/
http://syhdzm.1688.com/

Service Hotline
+86-575-82781973

News

Home > NewsContent

The Basic Operation Of Metal Spinning Machine Common Sense

Shaoxing Huida Metal Factory | Updated: Jun 08, 2017

The basic operation of metal spinning machine common sense
The metal spinning machine adopts the metal ductility to synthesize the process characteristics such as forging, extrusion, stretching, bending, rolling, rolling and rolling. It has the characteristics of non-cutting process, and the metal spinning machine has high quality and high efficiency. Metal products spinning molding process. Strong spinning is the rapid development of the fifties after this century. This molding technology has the advantages of good deformation condition, good product performance, small dimensional tolerance, high material utilization rate, wide range of products, and can process the whole seamless hollow rotary parts.

     IMPORTANT: You should be familiar with the position of the emergency stop button switch so that you can press it when you need it, and you must power off the machine before placing the fuse. Have enough work space to avoid danger. Water or oil can cause the ground to slip and cause danger. In order to prevent accidents, the working ground should be kept clean and dry.
 
Bai Rui metal spinning machine
     DANGER: Control devices, transformers, motors, junction boxes, high voltage terminals and other live parts Do not touch with hand (or no insulation), otherwise it will cause electric shock. Do not touch the switch with wet hands, otherwise it will cause electric shock.

     Before using the switch, be sure to make sure not to make mistakes, do not touch the switch. If a task is to be done by more than two people, then at every step of the operation we know that the metal spinner is equipped with a lot of safety devices to prevent damage and damage to the operator and equipment.
From the overall production and processing to understand that metal spinning plant occupies a very important position, and metal spinning machine which requirements also aroused people's attention. Only the machine can meet the actual production requirements, the final production of the product in the quality and the various parts can be more reliable, every friend should enrich the relevant knowledge.
In the process of recognizing the requirements of metal spinning, the machine is often important in terms of stiffness and should maintain a better stiffness. And from the overall power is also required, in terms of power to maintain a larger and very important, in order to achieve better results, machine accuracy in the higher, and general performance is more prominent is also very important.
So as to be able to meet the conditions in the machine, Hebei metal spinning plant production process in the machine are strictly abide by the relevant standards in the metal spinning production process in all parts of a reasonable deal, so I hope every friend production process Are rich in relevant knowledge, and ultimately get more satisfied with the production of the answer.


SHAOXING HUIDA METAL FACTORY 

Add: No.68,Beimen Haitang Road, Lihai Town, Shangyu Dist., Shaoxing, Zhejiang, China 

Tel: +86-0575-82781973

Fax: +86-0575-82781351

Mr. Peng Du

Sales Director

Mobile:+86 13735325636 

Email: 1023180779@qq.com

        13735325636@139.com


Tracy

Sales manager

Mobile: +86 13625813443
Email:sxhdtjl@foxmail.com
SKYPE:tracy4301